Numerical modeling of iron-based corrosion product oxides mass transport in the MYRRHA reactor during normal operation

Research output: Contribution to journalArticle

Institutes & Expert groups

  • VKI - The Von Karman Institute for Fluid Dynamics

Documents & links

DOI

Abstract

To support the design of an external filtering and conditioning system for the lead-bismuth cooled MYRRHA reactor, the formation and transport of iron oxide particles from corrosion products in the reactor primary system have been investigated for normal operating conditions. The regions of the reactor with the highest probability of oxide formation are identified by a local chemical equilibrium model for magnetite formation. This analysis reveals that magnetite precipitation generally occurs in regions with large temperature gradients. For the specific case of the MYRRHA reactor, these regions correspond to the transition region between the barrel and the upper plenum, mainly at the location of the holes in the top part of the barrel. The transport behaviour of solid oxides from these regions is then investigated with a multi-phase Euler-Lagrange particle tracking model of the MYRRHA primary system. The simulations show that the majority of large oxide particles (above 100 μm) will eventually move to the free surface without passing through the reactor core, thereby allowing their removal by an external filtering system with surface extraction. This indicates that such large particles present a minimal risk for sudden core blockage, which does not compromise reactor safety. On the other hand, particles below a threshold diameter identified at 40 μm cannot be efficiently filtered out by an external system since the majority follows the carrier liquid and re-enters the core during each LBE flow-through cycle. The continuous purification of the coolant is therefore necessary to avoid undesired build-up of suspended particles in the primary system. A preliminary design value of the required mass flow rate through the filters is identified with the support of numerical simulations.

Details

Original languageEnglish
Pages (from-to)199-208
Number of pages10
JournalNuclear Engineering and Design
Volume338
DOIs
StatePublished - 27 Aug 2018

Keywords

  • CFD Simulations, mass transfer, corrosion products, filtering

ID: 5102160