Towards Crack Arrest Testing Using Miniature Specimens

Research output: Contribution to journalArticle

Documents & links

DOI

Abstract

Crack arrest is an important concept that can be useful to guarantee the safety of reactor pressure vessels. In case of a pressurized thermal shock, a postulated crack can initiate and arrest due to a decrease in driving force combined with an increase in material toughness due to the thermal and neutron embrittlement gradient along the thickness. Due to the size of the specimen and the difficulty in obtaining valid results according to the ASTM E1221-06 standard, “Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels,” current efforts to develop this technique for irradiated materials are very limited. However, advances in dynamic fracture modeling and elastic-plastic fracture mechanics open the possibility of using miniature crack arrest specimens. We have developed a stiff setup to perform crack arrest tests on precracked Charpy PCCv specimens. Different strategies were evaluated to provide enough reduction in driving force to produce arrest. Special attention is given to the starter notch and different starter notch preparations are investigated: precracking, chevron, and brittle weld. Testing configurations were found that guarantee crack arrest with sufficient remaining ligament.

Details

Original languageEnglish
Pages (from-to)1-15
JournalJournal of ASTM International
Volume5
Issue number9
DOIs
Publication statusPublished - Oct 2008

Keywords

  • crack arrest, PCCv, starter notch, finite element calculations

ID: 73633