Use of KLST-Type Miniature Charpy Specimens for Measuring Dynamic Fracture Toughness under Impact Loading Rates

Research output: Contribution to journalArticlepeer-review

Standard

Use of KLST-Type Miniature Charpy Specimens for Measuring Dynamic Fracture Toughness under Impact Loading Rates. / Lucon, Enrico; Scibetta, Marc.

In: Journal of ASTM International, Vol. 4, No. 10, 10.2007, p. 1-8.

Research output: Contribution to journalArticlepeer-review

Bibtex - Download

@article{f025823286154e1399adbe58e9cb1b50,
title = "Use of KLST-Type Miniature Charpy Specimens for Measuring Dynamic Fracture Toughness under Impact Loading Rates",
abstract = "The knowledge of dynamic mechanical properties is useful in all cases where the strain rate sensitivity of metallic materials is an issue, and whenever the actual loading conditions for a structure either in normal operation or under accidental circumstances are different from static. Furthermore, in some investigations, increasing the loading rate in a mechanical test is used to simulate other embrittling mechanisms such as thermal aging or neutron exposure. Precracked Charpy-type PCVN specimens, tested under impact loading rates using an instrumented pendulum, have been used for more than 30 years to measure dynamic fracture toughness; the experimental procedure and the analysis methodology are fairly well established, despite the lack of an ASTM or ISO official test standard. This paper addresses the applicability of fatigue precracked miniature Charpy specimens of KLST type (PKLST-B = 3 mm, W = 4 mm and L = 27 mm) for impact toughness measurements in the ductile-to-brittle transition regime and in fully ductile (upper shelf) conditions. In the transition region, tests have been analyzed using the Master Curve approach; the multiple-specimen (low-blow) method has been applied in the upper shelf regime.",
keywords = "dynamic mechanical properties, strain rate sensitivity, loading rate, impact fracture toughness, PKLST specimens, ductile-to-brittle transition regime, upper shelf, JRQ, loss of constraint",
author = "Enrico Lucon and Marc Scibetta",
note = "Score = 10",
year = "2007",
month = oct,
language = "English",
volume = "4",
pages = "1--8",
journal = "Journal of ASTM International",
issn = "1546-962X",
publisher = "ASTM International",
number = "10",

}

RIS - Download

TY - JOUR

T1 - Use of KLST-Type Miniature Charpy Specimens for Measuring Dynamic Fracture Toughness under Impact Loading Rates

AU - Lucon, Enrico

AU - Scibetta, Marc

N1 - Score = 10

PY - 2007/10

Y1 - 2007/10

N2 - The knowledge of dynamic mechanical properties is useful in all cases where the strain rate sensitivity of metallic materials is an issue, and whenever the actual loading conditions for a structure either in normal operation or under accidental circumstances are different from static. Furthermore, in some investigations, increasing the loading rate in a mechanical test is used to simulate other embrittling mechanisms such as thermal aging or neutron exposure. Precracked Charpy-type PCVN specimens, tested under impact loading rates using an instrumented pendulum, have been used for more than 30 years to measure dynamic fracture toughness; the experimental procedure and the analysis methodology are fairly well established, despite the lack of an ASTM or ISO official test standard. This paper addresses the applicability of fatigue precracked miniature Charpy specimens of KLST type (PKLST-B = 3 mm, W = 4 mm and L = 27 mm) for impact toughness measurements in the ductile-to-brittle transition regime and in fully ductile (upper shelf) conditions. In the transition region, tests have been analyzed using the Master Curve approach; the multiple-specimen (low-blow) method has been applied in the upper shelf regime.

AB - The knowledge of dynamic mechanical properties is useful in all cases where the strain rate sensitivity of metallic materials is an issue, and whenever the actual loading conditions for a structure either in normal operation or under accidental circumstances are different from static. Furthermore, in some investigations, increasing the loading rate in a mechanical test is used to simulate other embrittling mechanisms such as thermal aging or neutron exposure. Precracked Charpy-type PCVN specimens, tested under impact loading rates using an instrumented pendulum, have been used for more than 30 years to measure dynamic fracture toughness; the experimental procedure and the analysis methodology are fairly well established, despite the lack of an ASTM or ISO official test standard. This paper addresses the applicability of fatigue precracked miniature Charpy specimens of KLST type (PKLST-B = 3 mm, W = 4 mm and L = 27 mm) for impact toughness measurements in the ductile-to-brittle transition regime and in fully ductile (upper shelf) conditions. In the transition region, tests have been analyzed using the Master Curve approach; the multiple-specimen (low-blow) method has been applied in the upper shelf regime.

KW - dynamic mechanical properties

KW - strain rate sensitivity

KW - loading rate

KW - impact fracture toughness

KW - PKLST specimens

KW - ductile-to-brittle transition regime

KW - upper shelf

KW - JRQ

KW - loss of constraint

UR - http://ecm.sckcen.be/OTCS/llisapi.dll/open/ezp_84109

UR - http://knowledgecentre.sckcen.be/so2/bibref/4552

M3 - Article

VL - 4

SP - 1

EP - 8

JO - Journal of ASTM International

JF - Journal of ASTM International

SN - 1546-962X

IS - 10

ER -

ID: 244765